Tribological performance of TiN coatings deposited on 304 L stainless steel used for olive-oil extraction A Bahri, N Guermazi, K Elleuch, M Ürgen Wear 342, 77-84, 2015 | 50 | 2015 |
Hammer premature wear in mineral crushing process M Kallel, F Zouch, Z Antar, A Bahri, K Elleuch Tribology International 115, 493-505, 2017 | 37 | 2017 |
Wear protection potential of TiN coatings for 304 stainless steels used in rotating parts during olive oil extraction A Bahri, E Kaçar, SS Akkaya, K Elleuch, M Ürgen Surface and Coatings Technology 304, 560-566, 2016 | 35 | 2016 |
On the erosive wear of 304 L stainless steel caused by olive seed particles impact: Modeling and experiments A Bahri, N Guermazi, K Elleuch, M Ürgen Tribology International 102, 608-619, 2016 | 28 | 2016 |
On the mechanical behaviour of industrial PVC pipes under pressure loading: experimental and numerical studies H Jemii, A Bahri, A Boubakri, D Hammiche, K Elleuch, N Guermazi Journal of Polymer Research 27, 1-13, 2020 | 16 | 2020 |
Tribological behavior of virgin and aged polymeric pipes under dry sliding conditions against steel H Jemii, A Boubakri, A Bahri, D Hammiche, K Elleuch, N Guermazi Tribology International 154, 106727, 2021 | 11 | 2021 |
Brinell indentation behavior of the stainless steel X2CrNi18-9: Modeling and experiments A Bahri, M Ellouz, M Klöcker, T Kordisch, K Elleuch International Journal of Mechanical Sciences 163, 105142, 2019 | 11 | 2019 |
Tribological study of Fe–W–P electrodeposited coating on 316 L stainless steel F Zouch, Z Antar, A Bahri, K Elleuch, M Ürgen Journal of Tribology 140 (1), 011301, 2018 | 11 | 2018 |
Estimation of the elastic modulus of the alumina coated AA1050 aluminum: Modeling and experiments A Bahri, N Guermazi, M Bargui, K Elleuch Materials Science and Engineering: A 670, 188-195, 2016 | 8 | 2016 |
Mechanical behavior and fracture characteristics of polymeric pipes under curved three point bending tests: Experimental and numerical approaches H Jemii, A Bahri, R Taktak, N Guermazi, F Lebon Engineering Failure Analysis 138, 106352, 2022 | 6 | 2022 |
On the erosive wear of carbon fiber-reinforced epoxy composite in the olive oil extraction process MM Sakka, A Bahri, E Kaçar, K Elleuch, M Urgen Journal of Tribology 142 (7), 074502, 2020 | 2 | 2020 |
Thermal Wear Sensing System: Proof of the Concept MM Sakka, A Bahri, Z Antar, K Elleuch, P Ponthiaux, D Drees, JP Celis Journal of Materials Engineering and Performance 27, 4635-4644, 2018 | 2 | 2018 |
Damage evolution of the coating/substrate system TiN/X2CrNi18-9 under high indentation loads: experimental and numerical study A Bahri, M Ellouz, M Klöcker, K Elleuch, T Kordisch International Journal of Mechanics and Materials in Design 20 (1), 35-53, 2024 | 1 | 2024 |
Tribological performance of high chromium white cast iron and heat-treated steel used in barite crushing industry F Zouch, A Bahri, Z Antar, K Elleuch Scientific Reports 13 (1), 9229, 2023 | 1 | 2023 |
Investigation on the wear resistance of Ni-B-TiO2 composite coatings for dry crushing application M Kallel, A Bahri, K Elleuch Handbook of Research on Tribology in Coatings and Surface Treatment, 218-244, 2022 | 1 | 2022 |
Flexural Behavior and Fracture Characteristics of Polymeric Pipes Under Curved Three-Point Bending (CTPB) Tests H Jemii, A Bahri, R Takatak, D Hammiche, N Guermazi Advances in Mechanical Engineering and Mechanics II: Selected Papers from …, 2022 | 1 | 2022 |
Surface Modification Effect on Wear Behavior of AISI P20 Steel W Yangui, M Kallel, A Bahri, K Elleuch International Conference on advances in Materials, Mechanics and …, 2023 | | 2023 |
On the Prediction of the Damage of High Chromium White Cast Iron Under the Impact of Barite Rocks: Modeling and Experiments F Zouch, A Bahri, K Elleuch Journal of Dynamic Behavior of Materials 8 (4), 473-491, 2022 | | 2022 |
Study of Fe-WP Coating Performance Under Scratch Test: Modeling and Experiments F Zouch, A Bahri, K Elleuch Advances in Mechanical Engineering, Materials and Mechanics: Selected …, 2021 | | 2021 |
On the erosive wear of Epoxy/CF composite in olive oil extraction process MM Sakka, A Bahri, E Kaçar, K Elleuch, M Urgen composites 12, 15, 2020 | | 2020 |